High Flow. High Temp.
The DyzEnd Pro has a really small form factor making it one of the smallest hotend on the market. It is designed with a new high-temperature heat block, a new ceramic coated transition tube, vibration dampening feature, reinforced sealing properties, and smaller vibration resistant connectors that are better suited for 3D printers in closed environments.
Designed for high-performance professional printing
Tungsten carbide nozzle
The DyzEnd Pro comes built in with ultimate durability and performance tungsten carbide nozzle. The high thermal performance of the tungsten carbide keeps the nozzle tip hot, thus allowing faster printing speed without sacrificing the quality. Tungsten carbide has exceptional wear resistance due to its high hardness.
New Ceramic Coated Transition Tube
The DyzEnd Pro is made from a ceramic coated titanium transition tube. The hard coating increases wear resistance and reduce friction, enabling easier retraction and better flow.
Fan sound/vibration dampening
The small rubber spacer absorbs the vibrations generated from the fan and reduces the noise. The higher quality fans have ball bearing, increasing lifespan and further reducing vibrations.
New High-Temperature Heat Block
Steel will keep its strength at high temperature much better than copper or aluminum. The new block shape reduce the losses by breaking the sharp edges. The coating is very slippery and easier to clean.
Inconel sealing washer
Inconel is heat-resistant alloys used in extreme environments. The sealing washer easily keeps its sealing properties, even at 500°C.
Any Temperature Sensor
Choose between a 300°C Thermistor, a 500°C Thermistor, a 500°C PT100, or a 500°C Type K thermocouple sensor.
Smaller, vibration resistant new connectors are better adapted for 3D printers environment.
Liquid Cooling Ready
The DyzEnd Pro can be easily converted to a liquid cooled setup with Dyze Design’s specialized cooling blocks.
Cold Swappable Nozzles
By using a very special high-temperature sealing washer and a very strong M10 nozzle, the DyzEnd Pro is able to switch nozzles at room temperature. No leaks, no burning hazard.
Small Form Factor
By using a low conductivity transition tube, the DyzEnd Pro is one of the smallest hotend on the market. This enables you to use your build volume more efficiently.
The DyzEnd Pro is compatible with a M8x1.25 push to connect fitting. The 4mm PTFE tube can be inserted through the connector and guides the filament as far as possible inside the hotend.
The hotend mounting mechanism is based on the form factor called “Groove Mount”. The 12mm groove makes it very easy to switch and maintain your hotend and nozzle.
Rigorous Quality Control
Critical parts are under strict quality control upon reception and are 100% tested.
Our qualified assembling team has many tools for validating performance throughout the assembly process.
Print any plastics
The DyzEnd Pro is able to print every single type of plastic filaments currently sold on the market
|Weight – Hotend||52||g|
|Operating Voltage||12, 24||V|
|Operating temperature (air cooled)||0 to +60||°C|
|Operating temperature (liquid cooled)||0 to +120||°C|
|Thermistor resistance at 25°C (500°C)||4700||kΩ|
|Thermistor resistance at 200°C (500°C)||8||kΩ|
|Maximum temperature – 40W||420||°C|
|Maximum temperature – 60W||500||°C|